教授、博导

职位

联系方式

yaowuhu@whu.edu.cn

https://www.x-mol.com/groups/yaowuhu

主要研究方向

激光先进制造

教育工作经历

教育经历

2012-2016，博士，普渡大学工业工程系

研究方向：激光冲击微纳制造

2009-2012，硕士，中国科学院力学研究所

研究方向：激光熔凝

2005-2009，工学学士，东南大学

专业：工程力学

工作经历

2018/11-至今，教授，武汉大学青年学术带头人，武汉大学工业科学研究院

主要从事激光先进制造的研究工作

2017/08-2018/10，终生轨道制助理教授，机械与航空工程系，美国纽约州立大学布法罗分校

论文发表和专利

1. Wang, Z.; Huang, Z.; Lu, N.; Guan, J.#; Hu, Y.# Energy Transfer and Patterning Characteristics in Pulsed-Laser Subtractive Manufacturing of Single Layer of MoS 2. Int. J. Heat Mass Transf. 2023, 204, 123873. https://doi.org/10.1016/j.ijheatmasstransfer.2023.123873.

2. Liu, J.; He, Y.; Hu, Y.# Reshaping Strategy at Ultrahigh Strain Rates Enables Large‐Scale Fabrication of Sharp Nanostructures. Adv. Opt. Mater. 2023. https://doi.org/10.1002/adom.202300143.

3. Zhang, X.; Liu, J.; Xia, M.; Hu, Y.# Laser Shock Peening Enables 3D Gradient Metal Structures : A Case Study on Manufacturing Self-Armored Hydrophobic Surfaces. Int. J. Mach. Tools Manuf. 2023, 185, 103993. https://doi.org/10.1016/j.ijmachtools.2023.103993.

4. Zhao, Z.; Xu, S.; Liu, J.; Zhang, X.; Xia, M.#; Hu, Y.# Force Enhanced Wire Laser Additive Manufacturing of Aluminum and Titanium Alloys. J. Alloys Compd. 2023, 938, 168617. https://doi.org/10.1016/j.jallcom.2022.168617.

5. Xia, M.; Shao, H.; Huang, Z.; Zhao, Z.; Jiang, F.; Hu, Y#. Intelligent Process Monitoring of Laser-Induced Graphene Production With Deep Transfer Learning. IEEE Trans. Instrum. Meas. 2022, 71, 1–9. https://doi.org/10.1109/TIM.2022.3186688.

6. Liu, J.; Zhang, X.; He, Y.; Zhao, Z.; Xia, M.; Hu, Y#. Suspended Water Droplet Confined Laser Shock Processing at Elevated Temperatures. Int. J. Mach. Tools Manuf. 2022, 179 (April), 1–20. https://doi.org/10.1016/j.ijmachtools.2022.103917.

7. Huang, Z.; Lu, N.; Wang, Z.; Xu, S.; Guan, J.; Hu, Y#. Large-Scale Ultrafast Strain Engineering of CVD-Grown Two-Dimensional Materials on Strain Self-Limited Deformable Nanostructures toward Enhanced Field-Effect Transistors. Nano Lett. 2022. https://doi.org/10.1021/acs.nanolett.2c01559.

8. Lu, H.; Zhang, X.; Liu, J.; Zhao, S.; Lin, X.; Li, H.; Hu, Y#. Study on Laser Shock Modulation of Melt Pool in Laser Additive Manufacturing of FeCoCrNi High-Entropy Alloys. J. Alloys Compd. 2022, 925, 166720. https://doi.org/10.1016/j.jallcom.2022.166720.

所获荣誉

1. 国家优秀自费留学生奖学金（2016）

2. 东南大学优秀毕业生（2009）